Fits Aqua-Flo
Parts for Aqua-Flo 48Y
Every aftermarket part in our catalog that fits Aqua-Flo 48Y, cross-referenced to the OEM numbers so you can order against the numbers you already have.
4 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Aqua-Flo. Model names indicate fitment only.
Aqua-Flo 48Y: 4 aftermarket replacement parts, including Wet End and Gasket. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Aqua-Flo original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
4 parts
Fits Aqua-Flo
Wet End, 0.5 HP, for FMCP 48Y Frame Pumps, Replacement for Aqua-Flo
All 4 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 91040810 | Wet End Assembly, 1 HP, for FMCP 48Y Frame Pumps, Compatible with Aqua-Flo | |
| 91040840 | Wet End Assembly, 2 HP, for FMCP 48Y Frame Pumps, Compatible with Aqua-Flo | |
| 91040830-000 | Wet End, 0.5 HP, for FMCP 48Y Frame Pumps, Replacement for Aqua-Flo | |
| G-71-9 | Motor Water Slinger Gasket for 56J Threaded Motors |
Not sure which part on your Aqua-Flo 48Y failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Aqua-Flo 48Y
Are these genuine Aqua-Flo parts for the Aqua-Flo 48Y?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Aqua-Flo 48Y. POOLPOINT is not affiliated with Aqua-Flo.
Can I get one quote for every part of the Aqua-Flo 48Y?
Yes. Use "Add all 4 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
Other Aqua-Flo models
All modelsAn equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Aqua-Flo. The Aqua-Flo name and OEM numbers are used to identify fitment only.