Fits equipment model
Parts for FMHP
Every aftermarket part in our catalog that fits FMHP, cross-referenced to the OEM numbers so you can order against the numbers you already have.
15 parts
FMHP: 15 aftermarket replacement parts, including Wet End, Cover and O-Ring. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not OEM original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
15 parts
Fits Gecko
Wet End Assembly, 2 HP, for FMHP Pumps, Compatible with Gecko
Fits SuperPro
O-Ring, 4-3/4-Inch ID, 3/32-Inch Cross Section for Flo-Master Pumps
Fits Aqua-Flo
Impeller, 1 HP, Compatible with Aqua-Flo FMCP, FMHP and TMCP Pumps
All 15 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 91040690 | Wet End Assembly, 0.75 HP, for FMHP Pumps, Compatible with Aqua-Flo | |
| 91040730 | Wet End Assembly, 2 HP, for FMHP Pumps, Compatible with Gecko | 91040730-000 |
| 91040700 | Wet End, 1 HP, for FMHP Pumps, Replacement for Gecko | 91040700-000 |
| 91040720 | Wet End, 1.5 HP, for FMHP Pumps, Replacement for Gecko | 91040720-000 |
| 56910040 | Cover Kit, Complete, for FMCP and FMHP Pumps, Compatible with Gecko | |
| 91231301 | Pump Cover for FMHP and CMHP Pumps, Replacement for Aqua-Flo | |
| O-446-14 | Drain Plug O-Ring for FMHP Pumps, Compatible with Aqua-Flo | |
| O-257-9 | O-Ring, 4-3/4-Inch ID, 3/32-Inch Cross Section for Flo-Master Pumps | |
| 92200090 | Volute O-Ring, 4-3/4-Inch ID, 3/32-Inch Cross Section, for TMCP and FMHP Pumps | |
| 92200270 | Volute O-Ring, 5-1/8-Inch ID, for FMCP, FMHP and TMCP Models | |
| 50100130 | Union Adapter with O-Ring, 1-1/2 x 2-Inch, for FMCP Pumps | |
| 91920011 | Trap Lock Handle for FMHP and FMCP Traps | |
| 91693601 | Impeller, 1 HP, Compatible with Aqua-Flo FMCP, FMHP and TMCP Pumps | |
| 52271000 | Pump Union Set, 1-1/2-Inch FBT x 1-1/2-Inch Slip, Compatible with Aqua-Flo | |
| 92770501 | Volute for FMHP, FMVP and CMHP Pumps, Replacement for Gecko |
Not sure which part on your FMHP failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the FMHP
Are these genuine OEM parts for the FMHP?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your FMHP. POOLPOINT is not affiliated with the equipment manufacturer.
Can I get one quote for every part of the FMHP?
Yes. Use "Add all 15 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer of compatible replacement parts. Not affiliated with, sponsored by, or endorsed by Hayward, Pentair, Jandy, Sta-Rite or Zodiac. All brand names and OEM part numbers are used for identification of fitment only.