Fits Jacuzzi
Parts for Jacuzzi CFT25
Every aftermarket part in our catalog that fits Jacuzzi CFT25, cross-referenced to the OEM numbers so you can order against the numbers you already have.
5 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jacuzzi. Model names indicate fitment only.
Jacuzzi CFT25: 5 aftermarket replacement parts, including Drain Plug, Standpipe and Tank Body. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jacuzzi original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
5 parts
Fits Jacuzzi
Drain Plug with O-Ring, 1/4-Inch, for CRF25 and CFT25 Pumps, Set of 2
All 5 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 30060906R2 | Drain Plug with O-Ring, 1/4-Inch, for CRF25 and CFT25 Pumps, Set of 2 | 31160906R2 |
| 42276105R | Standpipe for CFR25 and CFT25 Cartridge Filters | |
| 42278309R | Tank Body for CFR 25 and CFT 25 Filters | |
| 42275818R | Tank Lid, 1-1/2-Inch Slip, for CFR25 and CFT25 Filters, Compatible with Jacuzzi | |
| 4665-05 | Bypass Valve, Rubber, for CFR25 and CFT25 Filters, Compatible with Jacuzzi |
Not sure which part on your Jacuzzi CFT25 failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jacuzzi CFT25
Are these genuine Jacuzzi parts for the Jacuzzi CFT25?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jacuzzi CFT25. POOLPOINT is not affiliated with Jacuzzi.
Can I get one quote for every part of the Jacuzzi CFT25?
Yes. Use "Add all 5 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jacuzzi. The Jacuzzi name and OEM numbers are used to identify fitment only.