Fits Maytronics
Parts for Maytronics S200
Every aftermarket part in our catalog that fits Maytronics S200, cross-referenced to the OEM numbers so you can order against the numbers you already have.
7 parts
Also written as Dolphin S200 · Maytronics Dolphin S200
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Maytronics. Model names indicate fitment only.
Maytronics S200: 7 aftermarket replacement parts, including Cable, Brush and Bushing. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Maytronics original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
7 parts
Fits Maytronics
Cleaner Cable with Swivel, 60-Foot, 2-Wire, Compatible with Maytronics Dolphin
Fits Maytronics
Dynamic Cable, 60-Foot, 3-Wire, Blue, Replacement for Maytronics
Fits Maytronics
Rear Brush Assembly, Blue, for Dolphin Cleaners, Compatible with Maytronics
Fits Maytronics
Wheel Bushing for Dolphin Pool Cleaners, Replacement for Maytronics
Fits Maytronics
Motor Unit for S200, S300 and S300I Cleaners, Compatible with Maytronics
All 7 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 99958907-DIY | Cleaner Cable with Swivel, 60-Foot, 2-Wire, Compatible with Maytronics Dolphin | |
| 9995885-DIY | Dynamic Cable, 60-Foot, 3-Wire, Blue, Replacement for Maytronics | |
| 99955381-ASSY | Rear Brush Assembly, Blue, for Dolphin Cleaners, Compatible with Maytronics | |
| 9983114 | Wheel Bushing for Dolphin Pool Cleaners, Replacement for Maytronics | |
| 99953058-EX | Motor Unit for S200, S300 and S300I Cleaners, Compatible with Maytronics | |
| SM1-HP3 | Side Mount Multiport Valve, 1-1/2-Inch FIP, ABS, Compatible with Hayward S200 and S240 Filters | |
| 6350150 | Non-Return Flap, Compatible with Maytronics S200, S300, S300i, S400 and Active Cleaners |
Not sure which part on your Maytronics S200 failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Maytronics S200
Are these genuine Maytronics parts for the Maytronics S200?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Maytronics S200. POOLPOINT is not affiliated with Maytronics.
Can I get one quote for every part of the Maytronics S200?
Yes. Use "Add all 7 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Maytronics. The Maytronics name and OEM numbers are used to identify fitment only.