Fits WaterTech
Parts for WaterTech iVac 150
Every aftermarket part in our catalog that fits WaterTech iVac 150, cross-referenced to the OEM numbers so you can order against the numbers you already have.
3 parts
Also written as IVAC 150
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by WaterTech. Model names indicate fitment only.
WaterTech iVac 150: 3 aftermarket replacement parts, including Filter Bag and Bag. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not WaterTech original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
3 parts
Fits WaterTech
Sand and Silt Filter Bag for Pool Blaster iVac, Compatible with WaterTech
Fits WaterTech
Microfilter Bags, 3-Pack, Compatible with WaterTech IVAC, Aqua Broom and FX-2 CleanersAll 3 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| P12X022AP | All-Purpose Filter Bag for Aqua Broom Sweep XL and IVAC Cleaners, Compatible with WaterTech | |
| P12X022SS | Sand and Silt Filter Bag for Pool Blaster iVac, Compatible with WaterTech | |
| P12X022MF | Microfilter Bags, 3-Pack, Compatible with WaterTech IVAC, Aqua Broom and FX-2 Cleaners | IVAB022MF |
Not sure which part on your WaterTech iVac 150 failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the WaterTech iVac 150
Are these genuine WaterTech parts for the WaterTech iVac 150?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your WaterTech iVac 150. POOLPOINT is not affiliated with WaterTech.
Can I get one quote for every part of the WaterTech iVac 150?
Yes. Use "Add all 3 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
Other WaterTech models
All modelsAn equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by WaterTech. The WaterTech name and OEM numbers are used to identify fitment only.