Fits WMC
Parts for WMC AT Series
Every aftermarket part in our catalog that fits WMC AT Series, cross-referenced to the OEM numbers so you can order against the numbers you already have.
8 parts
Also written as WMC AT Series
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by WMC. Model names indicate fitment only.
WMC AT Series: 8 aftermarket replacement parts, including Gasket, End and Impeller. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not WMC original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
8 parts
All 8 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| SS-1600-R | Diffuser Gasket for WMC/PPC AT Series Pumps | 31B1107, SP1600R, SPX1600R |
| 5150-12 | Housing Gasket for AT Series Pumps, Compatible with WMC | |
| AT-1600-S | Strainer Cover Gasket for WMC/PPC AT Series Pumps | 5110-04 |
| ATWE | Wet End without Impeller for AT Series Pumps, Replacement for WMC | |
| SS6162I | Impeller, 3/4 HP, for AT Series Pumps | |
| 5150-14 | Mounting Plate for AT Series Pumps, Replacement for WMC | |
| AT-1600-AA | Pump Housing for WMC and PPC AT Series Pumps | 120001, 5150-07 |
| 5150-130 | Seal Plate for AT Series Pumps, Replacement for WMC |
Not sure which part on your WMC AT Series failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the WMC AT Series
Are these genuine WMC parts for the WMC AT Series?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your WMC AT Series. POOLPOINT is not affiliated with WMC.
Can I get one quote for every part of the WMC AT Series?
Yes. Use "Add all 8 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
Other WMC models
All modelsAn equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by WMC. The WMC name and OEM numbers are used to identify fitment only.