Fits Jandy
Parts for Jandy HHP
Every aftermarket part in our catalog that fits Jandy HHP, cross-referenced to the OEM numbers so you can order against the numbers you already have.
15 parts
Also written as Jandy HHP
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jandy. Model names indicate fitment only.
Jandy HHP: 15 aftermarket replacement parts, including Hardware, Impeller and Diffuser O-Ring. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jandy original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
15 parts
All 15 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0339300 | Bracket Mounting Hardware Set, 6-Piece, Compatible with Jandy Pumps | |
| R0339000 | Diffuser Hardware for HHP and HHPU Pumps, Replacement for Jandy | |
| R0339200 | Foot Mounting Hardware Set, 2-Piece, Compatible with Jandy HHP Pumps | |
| R0338003 | Impeller, 1.5 HP Full Rate and 2 HP Up Rate, Compatible with Jandy HHP and HHPU Pumps | |
| R0338004 | Impeller, 2.0/2.5 HP for HHP and HHPU Pumps, Replacement for Jandy | |
| R0338005 | Impeller, 3 HP Full Rate, Compatible with Jandy HHP Pumps | |
| R0338805 | Diffuser O-Ring for 330 Diffuser, 3 HP, Replacement for Jandy | |
| R0338801 | Diffuser O-Ring, -330, for 0.75 HP to 2 HP Pumps, Replacement for Jandy | |
| R0338700 | Body O-Ring, -264, Compatible with Jandy HHP and HHPU Pumps | |
| R0339600 | Coupling Nut O-Ring Set for JHP Series Pumps | |
| R0337900 | Mounting Bracket for HHP Series Pumps, Replacement for Jandy | |
| R0338105 | Diffuser, 3 HP Full Rate, Compatible with Jandy HHP Series Pumps | |
| R0338500 | Strainer Lid with O-Ring for MHP, MHPU and HHP Series, Replacement for Jandy | |
| R0338900 | Pot Lid O-Ring, -359, Replacement for Jandy | O-13-9 |
| 634016 | Shaft Seal for HHP Series Pumps, Compatible with Waterco |
Not sure which part on your Jandy HHP failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jandy HHP
Are these genuine Jandy parts for the Jandy HHP?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jandy HHP. POOLPOINT is not affiliated with Jandy.
Can I get one quote for every part of the Jandy HHP?
Yes. Use "Add all 15 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jandy. The Jandy name and OEM numbers are used to identify fitment only.