Fits Jandy
Parts for Jandy ePump
Every aftermarket part in our catalog that fits Jandy ePump, cross-referenced to the OEM numbers so you can order against the numbers you already have.
16 parts
Also written as Jandy ePump
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jandy. Model names indicate fitment only.
Jandy ePump: 16 aftermarket replacement parts, including O-Ring, Basket and Connector. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jandy original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
16 parts
Fits Jandy
Back Plate Kit with Seals and Bolts, Replacement for Jandy Stealth Pumps
Fits Jandy
Mechanical Shaft Seal, 5/8-Inch ID, Compatible with Jandy Pro Series Pumps
Fits Jandy
Pump Union Tailpiece, 2 x 2.5-Inch, Compatible with Jandy Stealth PumpsAll 16 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0446500 | Diffuser and Impeller Hardware O-Ring Kit, Replacement for Jandy Pumps | |
| R0479000 | Pressure O-Ring, Blue, Compatible with Jandy Pumps | |
| R0446200 | Pump Lid Seal and O-Ring Kit | R0116200, R0446200 |
| R0446400 | Tail Piece O-Ring Set, 2-Pack, Replacement for Jandy Pumps | |
| R0445900 | Debris Filter Basket for Jandy Pool and Spa Pumps | R0445900 |
| R0660900 | Speed Drive Connector, 4-Pin, for ePump, Replacement for Jandy | |
| R0474800 | Rear Fan Cover, 1-3 HP, Compatible with Jandy JEP Series | |
| R0445400 | Diffuser with O-Ring and Hardware, 0.5 HP to 3 HP, Compatible with Jandy Pumps | |
| R0446300 | Backplate O-Ring Gasket, Replacement for Jandy Pumps | O-521, YR0446300 |
| R0475100 | Speed Drive Hardware Kit for JEP Series, Replacement for Jandy | |
| R0359400 | Tie Rod Knob for DEV and DEL Series D.E. Filters | R0359400 |
| R0445800 | Lid with Locking Ring and Seal Kit for Jandy Pool and Spa Pumps | R0445800 |
| R0445200 | Back Plate Kit with Seals and Bolts, Replacement for Jandy Stealth Pumps | R0446600, R0479400 |
| R0445601 | Pump Body for SHPF and SHPM Stealth Pumps, Compatible with Jandy | |
| R0479400 | Mechanical Shaft Seal, 5/8-Inch ID, Compatible with Jandy Pro Series Pumps | PS-3890 |
| R0446101 | Pump Union Tailpiece, 2 x 2.5-Inch, Compatible with Jandy Stealth Pumps | 5020-133 |
Not sure which part on your Jandy ePump failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jandy ePump
Are these genuine Jandy parts for the Jandy ePump?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jandy ePump. POOLPOINT is not affiliated with Jandy.
Can I get one quote for every part of the Jandy ePump?
Yes. Use "Add all 16 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jandy. The Jandy name and OEM numbers are used to identify fitment only.