Fits Jandy
Parts for Jandy WFTR
Every aftermarket part in our catalog that fits Jandy WFTR, cross-referenced to the OEM numbers so you can order against the numbers you already have.
16 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jandy. Model names indicate fitment only.
Jandy WFTR: 16 aftermarket replacement parts, including And Diffuser, Gasket and Hardware. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jandy original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
16 parts
Fits Jandy
Lid and Lock-Ring Assembly with Seal for PHPF and PHPM Pumps, Replacement for Jandy
Fits Jandy
Back Plate Kit with Seals and Bolts, Replacement for Jandy Stealth Pumps
All 16 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0449502 | Impeller and Diffuser Kit, 1 HP, Replacement for Jandy MHPM and WTFR Pumps | |
| R0449503 | Impeller and Diffuser Kit, 1.5 HP, with Seals and Hardware, Compatible with Jandy | |
| R0446300 | Backplate O-Ring Gasket, Replacement for Jandy Pumps | O-521, YR0446300 |
| R0449100 | Pump Lid Seal Gasket with O-Ring for PlusHP2 and MaxHP Pumps, Compatible with Jandy | |
| R0446600 | Backplate Hardware Kit, Replacement for Jandy | |
| R0446700 | Motor Hardware Kit, Compatible with Jandy | |
| R0446500 | Diffuser and Impeller Hardware O-Ring Kit, Replacement for Jandy Pumps | |
| R0449200 | Tail Piece O-Ring for MHPM Pumps, Compatible with Jandy | |
| R0445400 | Diffuser with O-Ring and Hardware, 0.5 HP to 3 HP, Compatible with Jandy Pumps | |
| R0446000 | Drain Plug with O-Ring, Set of 2, Compatible with Jandy ePump, Stealth, PlusHP and FloPro Pumps | |
| R0448800 | Lid and Lock-Ring Assembly with Seal for PHPF and PHPM Pumps, Replacement for Jandy | A0578100, A0578200 |
| R0445200 | Back Plate Kit with Seals and Bolts, Replacement for Jandy Stealth Pumps | R0446600, R0479400 |
| R0448701 | Pump Body for MaxHP MHPM and WaterFeature WFTR Series, Replacement for Jandy | |
| R0448900 | Plus HP / Max HP Pool Pump Strainer Basket | R0448900 |
| R0449000 | Tailpiece with Union Nut for Legacy (2-Pack) | R0449000 |
| R0515400 | Impeller Screw with O-Ring, Compatible with Jandy Pumps |
Not sure which part on your Jandy WFTR failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jandy WFTR
Are these genuine Jandy parts for the Jandy WFTR?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jandy WFTR. POOLPOINT is not affiliated with Jandy.
Can I get one quote for every part of the Jandy WFTR?
Yes. Use "Add all 16 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jandy. The Jandy name and OEM numbers are used to identify fitment only.