Fits Jandy
Parts for Jandy HHPU
Every aftermarket part in our catalog that fits Jandy HHPU, cross-referenced to the OEM numbers so you can order against the numbers you already have.
10 parts
Also written as Jandy HHPU
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jandy. Model names indicate fitment only.
Jandy HHPU: 10 aftermarket replacement parts, including Diffuser O-Ring, Hardware and Impeller. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jandy original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
10 parts
All 10 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0338805 | Diffuser O-Ring for 330 Diffuser, 3 HP, Replacement for Jandy | |
| R0338801 | Diffuser O-Ring, -330, for 0.75 HP to 2 HP Pumps, Replacement for Jandy | |
| R0339300 | Bracket Mounting Hardware Set, 6-Piece, Compatible with Jandy Pumps | |
| R0339000 | Diffuser Hardware for HHP and HHPU Pumps, Replacement for Jandy | |
| R0338003 | Impeller, 1.5 HP Full Rate and 2 HP Up Rate, Compatible with Jandy HHP and HHPU Pumps | |
| R0338004 | Impeller, 2.0/2.5 HP for HHP and HHPU Pumps, Replacement for Jandy | |
| R0338700 | Body O-Ring, -264, Compatible with Jandy HHP and HHPU Pumps | |
| R0339600 | Coupling Nut O-Ring Set for JHP Series Pumps | |
| R0338105 | Diffuser, 3 HP Full Rate, Compatible with Jandy HHP Series Pumps | |
| R0338900 | Pot Lid O-Ring, -359, Replacement for Jandy | O-13-9 |
Not sure which part on your Jandy HHPU failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jandy HHPU
Are these genuine Jandy parts for the Jandy HHPU?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jandy HHPU. POOLPOINT is not affiliated with Jandy.
Can I get one quote for every part of the Jandy HHPU?
Yes. Use "Add all 10 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jandy. The Jandy name and OEM numbers are used to identify fitment only.