Fits Teledyne Laars
Parts for Teledyne Laars Jandy Laars Lite2
Every aftermarket part in our catalog that fits Teledyne Laars Jandy Laars Lite2, cross-referenced to the OEM numbers so you can order against the numbers you already have.
11 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Teledyne Laars. Model names indicate fitment only.
Teledyne Laars Jandy Laars Lite2: 11 aftermarket replacement parts, including Diverter, Knob and Bypass. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Teledyne Laars original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
11 parts
Fits Teledyne Laars
Indoor Draft Diverter, 7-Inch, Replacement for Teledyne Laars 250,000 BTU Heater
Fits Teledyne Laars
Indoor Draft Diverter, 8-Inch, Replacement for Teledyne Laars 325 Heater
Fits Teledyne Laars
Indoor Draft Hood, 5-Inch, Replacement for Teledyne Laars 125 Heater
Fits Teledyne Laars
Draft Hood and Vent Cap Adapter Plate for 250,000 BTU Heater, Replacement for Teledyne Laars
Fits Teledyne Laars
Header Flow Control Shaft, 2-Inch, Replacement for Teledyne LaarsAll 11 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 10561403 | Indoor Draft Diverter, 7-Inch, Replacement for Teledyne Laars 250,000 BTU Heater | |
| 10561404 | Indoor Draft Diverter, 8-Inch, Replacement for Teledyne Laars 325 Heater | |
| R0010700 | Temperature Control Knob, Replacement for Teledyne Laars | |
| R0099900 | Thermostat Selector Knob, Replacement for Teledyne Laars | |
| R0054900 | Bypass Assembly, 2-Inch, Replacement for Teledyne Laars | |
| 10561401 | Indoor Draft Hood, 5-Inch, Replacement for Teledyne Laars 125 Heater | |
| 10573500 | Flange, 2-Inch, Replacement for Teledyne Laars | |
| R0050800 | Header Gasket Set, 18-Pack, Replacement for Teledyne Laars | |
| R0011600 | Ceramic Insulator Assembly, Replacement for Teledyne Laars | |
| R0449703 | Draft Hood and Vent Cap Adapter Plate for 250,000 BTU Heater, Replacement for Teledyne Laars | |
| S0079800 | Header Flow Control Shaft, 2-Inch, Replacement for Teledyne Laars |
Not sure which part on your Teledyne Laars Jandy Laars Lite2 failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Teledyne Laars Jandy Laars Lite2
Are these genuine Teledyne Laars parts for the Teledyne Laars Jandy Laars Lite2?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Teledyne Laars Jandy Laars Lite2. POOLPOINT is not affiliated with Teledyne Laars.
Can I get one quote for every part of the Teledyne Laars Jandy Laars Lite2?
Yes. Use "Add all 11 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Teledyne Laars. The Teledyne Laars name and OEM numbers are used to identify fitment only.