Fits Teledyne Laars
Parts for Teledyne Laars LX
Every aftermarket part in our catalog that fits Teledyne Laars LX, cross-referenced to the OEM numbers so you can order against the numbers you already have.
13 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Teledyne Laars. Model names indicate fitment only.
Teledyne Laars LX: 13 aftermarket replacement parts, including Gasket, Blower and Bypass. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Teledyne Laars original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
13 parts
Fits Teledyne Laars
Temperature Sensor Gasket, Replacement for Teledyne Laars Heaters
Fits Teledyne Laars
Bypass Assembly with Hardware and Gasket for LX Heater, Replacement for Teledyne Laars
Fits Teledyne Laars
Indoor Vent Collar, 250 BTU, for LX and LT, Replacement for Teledyne Laars
Fits Teledyne Laars
Temperature Control Cover, Replacement for Teledyne Laars Heaters
Fits Teledyne Laars
Outdoor Grill for LX and LT Heaters, Replacement for Teledyne Laars
Fits Teledyne Laars
Rear Header with Hardware and Gaskets, Replacement for Teledyne Laars
Fits Teledyne Laars
Coupling Nut Kit with Flange, Replacement for Teledyne LaarsAll 13 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0336700 | Bypass Assembly Gasket, Replacement for Teledyne Laars | |
| R0456600 | Temperature Sensor Gasket, Replacement for Teledyne Laars Heaters | 6204-209, R0456500, R0477300, R0523900 |
| R0329800 | Blower Assembly, Replacement for Teledyne Laars | |
| R0327100 | Bypass Assembly with Hardware and Gasket for LX Heater, Replacement for Teledyne Laars | |
| R0331403 | Indoor Vent Collar, 250 BTU, for LX and LT, Replacement for Teledyne Laars | |
| R0330600 | Temperature Control Cover, Replacement for Teledyne Laars Heaters | |
| R0328500 | Outdoor Grill for LX and LT Heaters, Replacement for Teledyne Laars | |
| R0327000 | Rear Header with Hardware and Gaskets, Replacement for Teledyne Laars | |
| LXLATCH | Enclosure Door Latch for LX, Replacement for Pentair | |
| R0334600 | Siphon Loop, Replacement for Teledyne Laars Heaters | |
| 10-1462-07 | Eye Seal Ring for Cygnet, J, JCM, K and KM Series Pumps, Compatible with Jacuzzi | |
| R0327200 | Bypass Spring, Replacement for Teledyne Laars Heaters | |
| R0327300 | Coupling Nut Kit with Flange, Replacement for Teledyne Laars |
Not sure which part on your Teledyne Laars LX failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Teledyne Laars LX
Are these genuine Teledyne Laars parts for the Teledyne Laars LX?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Teledyne Laars LX. POOLPOINT is not affiliated with Teledyne Laars.
Can I get one quote for every part of the Teledyne Laars LX?
Yes. Use "Add all 13 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Teledyne Laars. The Teledyne Laars name and OEM numbers are used to identify fitment only.