Fits Hayward
Parts for Hayward SP3000X
Every aftermarket part in our catalog that fits Hayward SP3000X, cross-referenced to the OEM numbers so you can order against the numbers you already have.
6 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Hayward. Model names indicate fitment only.
Hayward SP3000X: 6 aftermarket replacement parts, including Strainer, O-Ring and Pump Housing. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Hayward original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
6 parts
Fits Hayward
Threaded Pump Housing and Strainer with Drain Plug for Super II
Fits Hayward
Super II Pump Housing, Cover, Basket & O-Ring Kit
Fits Hayward
Super II Pump Seal Plate, Hardware Kit and Impeller
All 6 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| SPX3020AA | Pump Housing and Strainer with Drain Plug for Super II | SPX3020AA |
| SPX3120AAZ | Threaded Pump Housing and Strainer with Drain Plug for Super II | SPX3120, SPX3120AAZ |
| SPX3000S | Trap Cover O-Ring for Strainer Pot, Replacement for Hayward | O-12-9 |
| SPX3020AA | Super II Pump Housing, Cover, Basket & O-Ring Kit | 21063-200-000, SPX3000M, SPX3020AA, SPX3100D |
| SPX3020E | Super II Pump Seal Plate, Hardware Kit and Impeller | SPX3010C, SPX3020E, SPXHKIT2 |
| SPX3100D | Threaded Strainer Cover for Super II Pump | SPX3100D |
Not sure which part on your Hayward SP3000X failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Hayward SP3000X
Are these genuine Hayward parts for the Hayward SP3000X?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Hayward SP3000X. POOLPOINT is not affiliated with Hayward.
Can I get one quote for every part of the Hayward SP3000X?
Yes. Use "Add all 6 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Hayward. The Hayward name and OEM numbers are used to identify fitment only.