Fits Hayward
Parts for Hayward Super II
Every aftermarket part in our catalog that fits Hayward Super II, cross-referenced to the OEM numbers so you can order against the numbers you already have.
6 parts
Also written as Hayward Super II
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Hayward. Model names indicate fitment only.
Hayward Super II: 6 aftermarket replacement parts, including Diffuser, Gasket and O-Ring. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Hayward original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
6 parts
Fits Hayward
Super II Pump Seal Plate, Hardware Kit and Impeller
Fits Hayward
Super II Pump Diffuser and Impeller Screw Parts, 1.5 HPAll 6 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| SPX2600B | Super Pump Diffuser for Super II | SPX2600B |
| SS-1600-R | Diffuser Gasket for WMC/PPC AT Series Pumps | 31B1107, SP1600R, SPX1600R |
| SPX3000S | Trap Cover O-Ring for Strainer Pot, Replacement for Hayward | O-12-9 |
| SPX3020E | Super II Pump Seal Plate, Hardware Kit and Impeller | SPX3010C, SPX3020E, SPXHKIT2 |
| SPX3020CKIT | Impeller and Diffuser Upgrade Kit for Super II Pump | SPX3020CKIT |
| SP3021B | Super II Pump Diffuser and Impeller Screw Parts, 1.5 HP | SP3021B, SPX3021B, SPX3021R |
Not sure which part on your Hayward Super II failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Hayward Super II
Are these genuine Hayward parts for the Hayward Super II?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Hayward Super II. POOLPOINT is not affiliated with Hayward.
Can I get one quote for every part of the Hayward Super II?
Yes. Use "Add all 6 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Hayward. The Hayward name and OEM numbers are used to identify fitment only.