Fits Hayward
Parts for Hayward SP1600X
Every aftermarket part in our catalog that fits Hayward SP1600X, cross-referenced to the OEM numbers so you can order against the numbers you already have.
5 parts
Also written as Hayward Super Pump SP1600X · Super Pump SP1600X
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Hayward. Model names indicate fitment only.
Hayward SP1600X: 5 aftermarket replacement parts, including Cover Lid, Diffuser and Gasket. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Hayward original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
5 parts
Fits Hayward
SuperPump Diffuser, Strainer Housing and Basket
All 5 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| SPX1600D | Strainer Cover Lid for Hayward Super Pump | SPX1600D |
| SPX1600D | SuperPump Diffuser, Strainer Housing and Basket | 350090, 355301, 356172Z, 400006 |
| SPX1600S | Pump Cover Gasket, Super Pump (O-177) (2-Pack) | HAY-101-2017, O-177, SPX1600S |
| SPX1600F5 | Motor Mounting Plate, Seal Plate and Shaft Seal Kit for Hayward Super Pump | SPX1600F5 |
| SPX2607CKIT | Drivetrain Upgrade Kit for Super Pump, 1 HP | SPX2607CKIT |
Not sure which part on your Hayward SP1600X failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Hayward SP1600X
Are these genuine Hayward parts for the Hayward SP1600X?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Hayward SP1600X. POOLPOINT is not affiliated with Hayward.
Can I get one quote for every part of the Hayward SP1600X?
Yes. Use "Add all 5 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Hayward. The Hayward name and OEM numbers are used to identify fitment only.