Fits Jandy
Parts for Jandy VS Flo Pro
Every aftermarket part in our catalog that fits Jandy VS Flo Pro, cross-referenced to the OEM numbers so you can order against the numbers you already have.
8 parts
Also written as VS FloPro
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jandy. Model names indicate fitment only.
Jandy VS Flo Pro: 8 aftermarket replacement parts, including Diffuser, Hardware and Bundle. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jandy original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
8 parts
Fits Jandy
FloPro FHPM Pump Diffuser, O-Ring and Backplate Bundle
Fits Jandy
Mechanical Shaft Seal, 5/8-Inch ID, Compatible with Jandy Pro Series PumpsAll 8 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0479701 | 1.5-2.5 HP Diffuser, Backplate O-Ring and Screw Kit for FloPro FHPM Pump | R0479701 |
| R0479701 | FloPro FHPM Pump Diffuser, O-Ring and Backplate Bundle | R0479500, R0479603, R0479701 |
| R0480400 | Diffuser and Impeller Hardware Kit, Compatible with Jandy | |
| R0446700 | Motor Hardware Kit, Compatible with Jandy | |
| R0480000 | FloPro FHPM Pump Lid and Debris Basket Bundle | R0480000, R0480100 |
| R0480200 | Lid O-Ring, Compatible with Jandy FHP Pumps | |
| R0480300 | Backplate O-Ring for FHPM and VS-FHP Series Pumps, Compatible with Jandy | |
| R0479400 | Mechanical Shaft Seal, 5/8-Inch ID, Compatible with Jandy Pro Series Pumps | PS-3890 |
Not sure which part on your Jandy VS Flo Pro failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jandy VS Flo Pro
Are these genuine Jandy parts for the Jandy VS Flo Pro?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jandy VS Flo Pro. POOLPOINT is not affiliated with Jandy.
Can I get one quote for every part of the Jandy VS Flo Pro?
Yes. Use "Add all 8 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jandy. The Jandy name and OEM numbers are used to identify fitment only.